PRODUCTS
- Printing chemicals
- Flat offset offset fountain solution
- Newspaper printing moistening solution -- cold fixing
- Commercial rotary printing fountain solution - thermosetting
- Fountain solution auxiliary products
- Water-borne light oil
- Light oil
- Dumb oil
- Special light oil
- Printing powder
- Oily spraying
- Hydrophilic and oily spraying
- Silicone lubricating emulsion
- Thermosetting rotary printing of silicon oil
- Printed chemicals
- Printing plate acid cleaning liquid
- Basic cleaning liquid
- Plate protector
- Baked version of glue
- Developer solution
- Printing cleaner
- Rubber blanket & ink roll cleaner
- Environmental friendly water-based cleaning agent
- Ink roll maintenance
- Others
Fountain solution auxiliary products
- 30094EW Additive 30094
- Low-quality paper or other magazines produced in and around the drum rotary machine can cause excessive paper wool, which in turn leads to excessive ink stacking and "white ring" on the rubber cloth of sheet-fed presses. In this case, EW additives should be used.
- 30093Fountain Dryer Liquid Dryer 30093
Fountain Dryer is super concentrate made to be added to any premixed fountain solution.
Once Fountain Dryer is added to the fountain solution water, ink will start to oxidize (dry) on the top layer.
- 30066Etch Control Extend the life and performance of fountain solutions
Extend the life and performance of fountain solutions
- 30039Mold Stop 30039
Mold Stop is a product used to kill mold and fungus growing in the water circulation tanks and water pipes.
Mold Stop is especially useful when mold and fungus exists in smaller water circulation tanks, and water pans.
- 30037System Cleaner A + B 30037
paper coatings, mold and calcium from the press circulating system. This ensures consistent quality
and longer life of the fountain solution. Can also be provided in powder form.
- 30036Fount System Cleaner 30036
Fountain Solution should be consistent at all times. If a build-up of ink, paper coatings or calcium occurs,
then the pH and conductivity of the working fountain solution will start to change,
leading to dampening related problems.
- 30038Anti-Foam 30038
- Anti-Foam is to be used in connection with excessive foam in
the water circulation tanks. If persistent foam problems occur
in the water circulation tanks add about on lid full of Anti-Foam
to the water circulation tank, and the foam problem should
disappear. If the foam problems still persist, please check with
your technical person as to what is causing the foam problem,
either mechanical or chemical.