PRODUCTS
- Printing chemicals
- Flat offset offset fountain solution
- Newspaper printing moistening solution -- cold fixing
- Commercial rotary printing fountain solution - thermosetting
- Fountain solution auxiliary products
- Water-borne light oil
- Light oil
- Dumb oil
- Special light oil
- Printing powder
- Oily spraying
- Hydrophilic and oily spraying
- Silicone lubricating emulsion
- Thermosetting rotary printing of silicon oil
- Printed chemicals
- Printing plate acid cleaning liquid
- Basic cleaning liquid
- Plate protector
- Baked version of glue
- Developer solution
- Printing cleaner
- Rubber blanket & ink roll cleaner
- Environmental friendly water-based cleaning agent
- Ink roll maintenance
- Others
- 30019Hand Scrub-Not just another hand cleaner 30019
Apply a small amount of Hand Scrub into the palm of the hand.
Add a small amount of water and rub hand vigorously together
for 5-10 seconds. Hold hands under running water maintaining
the rubbing motion to rinse off.
- 30017Master Spray Anti-Dry 30017
- Our Anti-Dry is an anti-skin to be used with all offset inks. The Anti-Dry will keep ink open in the ink fountain and on the inking rollers, when any stops occur during the production, such as during lunch breaks, and longer press stops for color adjustments. Anti-Dry can also be applied to the ink in open ink cans, to prevent skin from forming in the ink cans during storage of the ink.
- 30059Smash Blanket Repair 30059
Smash is applied to the rubber surface of offset printing blankets
to effect a temporary repair of low spots and indentations.
Smash contains a swelling agent which, when applied to the face
of the blanket in the damaged areas, will cause the surface to
return to its original level, enabling the printer to finish his shift
or complete a job without having to lift or change blankets. Smash
will not damage the printing surface but it will not repair cuts or any
damage where the surface rubber has been destroyed.
- 30057Ink Repellent 30057
Ink Repellent is designed to reduce/eliminate the unwanted accumulation of ink on the impression cylinder. Ink Repellent
will help prevent picking and piling problems associated with those heavy coverage 2-sided jobs. For the surface on paper
cutter beds it removes all the oxidation that has build up over the years, leaving a slick surface to slide paper over. Ink Repellent can also be used on all bindery equipment such as paper folder,book-binders, and stitchers