System Cleaner A + B 30037

• 

• Appearance	:	Liquid
  Color	:	Clear
  Odour	:	No particular odor
  Solubility	:	Completely soluble in water
  Boiling Point	:	100 C
  Relative density	:	1.01 @  20 C
  Volatility by vol	:	100
  pH value	:	a=10.3/b=1.1
  Flash point	:	None

• Fountain Solution should be consistent at all times. If a build-up of ink, paper coatings or calcium occurs, then the pH and conductivity of the working fountain solution will start to change, leading to dampening related problems.Systems Cleaner is designed to clean and remove ink, paper oatings, mold and calcium from the press circulating system. This ensures consistent quality and longer life of the fountain solution. Can also be provided in powder form.

  Advantages:
  - Cleans the entire circulation system including hoses
  - No listed hazardous materials
  - No need to drain dirty fountain solution
  - Step “A” loosens debris and emulsifies ink residues
  - Step “B” shocks and re-acidifies the system, reducing the
  possibility of contamination of the fresh fount with cleaning
  solution
  - No hot water is required
  - Eliminates the need to dismantle in order to clean system
  - Helps to keep fountain solution consistent
  - Easy to use, entire cleaning procedure takes about 45 minutes
  Recommendations for use:
  A normal recommended dosage is 5% per liter of water in the
  circulation tank. First add “A” to the dirty fountain solution,
  let circulate for about 30 minutes. The add“B”to the dirty
  water and let circulate for about 10 minutes, drain dirty water.
  Flush and rinse with clean water. Once the circulation tank has
  been adequately flushed, measure out fresh fountain solution and
  

  resume printing.

  Packaging:   1 liter   1 box / 12 liters