Home > Products
PRODUCTS
- Printing chemicals
- Flat offset offset fountain solution
- Newspaper printing moistening solution -- cold fixing
- Commercial rotary printing fountain solution - thermosetting
- Fountain solution auxiliary products
- Water-borne light oil
- Light oil
- Dumb oil
- Special light oil
- Printing powder
- Oily spraying
- Hydrophilic and oily spraying
- Silicone lubricating emulsion
- Thermosetting rotary printing of silicon oil
- Printed chemicals
- Printing plate acid cleaning liquid
- Basic cleaning liquid
- Plate protector
- Baked version of glue
- Developer solution
- Printing cleaner
- Rubber blanket & ink roll cleaner
- Environmental friendly water-based cleaning agent
- Ink roll maintenance
- Others
-
Appearance: Paste colour: yellowish brown Odor： Characteristic odor solubility： dissolved in water Boiling Point: 200 degrees Celsius Relative density: 1.2 at 20 C Flash point: No PH value： No
- It is suitable for all kinds of oxidized and dried ink. Adding 7% of the product to the ink can shorten the drying time by half or even the very hard-to-dry fluorescent blue ink.
Ink rejection tests by the leading ink producer in the United States show that the anti-friction and anti-scratch properties of the ink film have been improved.
It is more useful for non-absorbent printing materials such as polyester, vinyl and synthetic paper. Applicable to all print acceptors.
TurBO DRY can also solve the problems of acid printing, and can provide a large output as a desiccant.
TURBO DRY can also be directly added to the ink tank, but to ensure that it and ink mix evenly. If the effect is not obvious,
Up to 25% dosage can be added. Unlike traditional desiccants, the drying function of TURBO DRY has no limit level. Relatively large doses of TURBO DRY had no significant effect on the tone and color of ink in laboratory and printing with transparent yellow test.
Advantages: 1. Quick drying ink
2. Inks that are not easy to dry.
3. Suitable for all oil-based and rubber-based inks.
4. Only a small dose is needed.
Usage method:
In most cases, a 7% dose of ink can be added at the beginning, which can obviously provide drying speed.
TurBO DRY can be easily solved by particularly hard-to-dry ink or operations requiring emergency trimming, folding, folding or finishing.
The amount of additives can be used to adjust the drying speed.
Please note that the ink added with TURBO TRY should be removed from the printer as soon as possible after use, because the prints are printed each time.
The dosage required varies depending on the ink and coverage area.
Physicochemical properties:
Appearance: Paste color: yellowish brown
Odor: Non-characteristic odor solubility: dissolved in water
Boiling Point: > 200 degrees Celsius Ph: None