PRODUCTS
- Printing chemicals
- Flat offset offset fountain solution
- Newspaper printing moistening solution -- cold fixing
- Commercial rotary printing fountain solution - thermosetting
- Fountain solution auxiliary products
- Water-borne light oil
- Light oil
- Dumb oil
- Special light oil
- Printing powder
- Oily spraying
- Hydrophilic and oily spraying
- Silicone lubricating emulsion
- Thermosetting rotary printing of silicon oil
- Printed chemicals
- Printing plate acid cleaning liquid
- Basic cleaning liquid
- Plate protector
- Baked version of glue
- Developer solution
- Printing cleaner
- Rubber blanket & ink roll cleaner
- Environmental friendly water-based cleaning agent
- Ink roll maintenance
- Others
-
Appearance
Liquid
Colour
Clear
Odour
No particular characteristic odorr
Solubility
Soluble in water
Boiling Point
101C
elative Density
1.03 @ 20 C
Volatily by vol.
93.5
pH concentrate
13
Flash Point (C)
No Flash
Flexowash 100 is a biodegradable water miscible detergent for
removing water based inks. Consisting of a blend of detergents,
surfactants and solvents, Flexowash 100 will quickly and effectively
remove both wet and dried water based inks from ink fountains,
ink pumping systems, Anilox rollers, photopolymer printing plates
and dies. Flexowash 100 is also recommended for use with both
conventional and Flexo printer-slotters, Flexo bag presses using
water based inks, and as an all round general purpose cleaner.
Advantages:
- Low odor
- Low VOC
- Non-flammable
- Contains no phosphates
- Dilutes with water
Recommendations for use:
May be used in concentrated form, or diluted by water. Pour a
liberal amount onto a shop towel and clean of required parts or
pour directly onto the rollers.
Physical and chemical properties:
Appearance: Liquid Colour: Clear
Odour: No particular characteristic odor
Solubility: Soluble in water
Boiling Point: 101 C Relative Density : 1.03 @ 20 C
Volatily by vol. : 93.5 pH concentrate : 13
Flash Point (C) : No Flash
Packaging: 1 liter/12 liters/box