Home > Products
PRODUCTS
- Printing chemicals
- Flat offset offset fountain solution
- Newspaper printing moistening solution -- cold fixing
- Commercial rotary printing fountain solution - thermosetting
- Fountain solution auxiliary products
- Water-borne light oil
- Light oil
- Dumb oil
- Special light oil
- Printing powder
- Oily spraying
- Hydrophilic and oily spraying
- Silicone lubricating emulsion
- Thermosetting rotary printing of silicon oil
- Printed chemicals
- Printing plate acid cleaning liquid
- Basic cleaning liquid
- Plate protector
- Baked version of glue
- Developer solution
- Printing cleaner
- Rubber blanket & ink roll cleaner
- Environmental friendly water-based cleaning agent
- Ink roll maintenance
- Others
-
Appearance: Blue liquid odor: no special odor
P H: 3.97 Soluble: Completely soluble in water
Flash Point: No Relative Density: 1.02 at 20 C
- Type I embossing solution 30102
Application: I-FOUNT embossing solution is suitable for all sheet-fed presses. I-FOUNT is suitable for any water quality condition from soft water to hard water. It contains a strong wetting agent to ensure ink balance during the operation of the printing press. The new high-tech wetting agent enables us to prepare it without any conventional solvent used in the wetting solution.
I-FOUNT (Standard Modifier)
Characteristics: 1. Reducing surface tension;
2. Start up very fast to minimize paper waste;
3. Anti-corrosion;
4. The color is thicker and brighter.
5. PH solution is stable.
6. Compliance with ROHS and REACH.
Dosage: 2% dosage, that is, 100 liters of water with 2 liters of embellishment solution. The best dosage effect depends on the printing environment.
Packaging: 25, 200 liters/barrel
Cleaning: Clean the printing press wetting liquid circulation system regularly, and use the wetting system pipeline cleaning agent.
Storage: Shady, dry and ventilated dangerous warehouse, avoid contact with high temperature and open fire. Storage temperature ranges from 5 C to 45 C.
Preservation Period: The original package is not opened, keep 5 degree C to 45 degree C, avoid direct sunlight, and the shelf period is 24 months.
Suggestion: Monitoring the data of the working fluid, such as pH, conductivity, temperature and keeping stable, is helpful to ensure the printing quality.