Home > Products
PRODUCTS
- Printing chemicals
- Flat offset offset fountain solution
- Newspaper printing moistening solution -- cold fixing
- Commercial rotary printing fountain solution - thermosetting
- Fountain solution auxiliary products
- Water-borne light oil
- Light oil
- Dumb oil
- Special light oil
- Printing powder
- Oily spraying
- Hydrophilic and oily spraying
- Silicone lubricating emulsion
- Thermosetting rotary printing of silicon oil
- Printed chemicals
- Printing plate acid cleaning liquid
- Basic cleaning liquid
- Plate protector
- Baked version of glue
- Developer solution
- Printing cleaner
- Rubber blanket & ink roll cleaner
- Environmental friendly water-based cleaning agent
- Ink roll maintenance
- Others
Power Plus Plate Cleaner 30004
-
Appearance: Milky thick liquid. Colour: White
Odor: No characteristic odor. Solubility: Partially dissolved in water.
Boiling Point: 100 degrees Celsius Relative Density: 1.03 at 20 degrees Celsius
Flash point: 56 degrees Celsius PH value: 0.8
- Application: Power Plus is a general cleaning solution and scratch remover. It contains special mixed solvents which can quickly remove residual ink and effectively clean the page. It also has your super scratch removing ability.
Features: Suitable for all kinds of metal plate.
Containing fine abrasives, ink cleaning ability is strong.
After many brand plate testing, performance assurance.
Stable performance, economical and practical.
Remove oxides, scum and scratches.
Use: To remove dirt, scratches and oxides, pour Dynamight into a clean sponge and scrub the entire version.
Noodles, pay special attention to dirty places. Wash with water, and you can start printing again.
Packaging: 1 liter/bottle, 12 bottles/cases
Storage: A cool, dry and ventilated warehouse with storage temperatures ranging from 0 C to 40 C. A small amount of stratification is a normal phenomenon.
Shake well in front.
Shelf life: the original package is not opened, keep 0 C to 40 C, avoid direct sunlight, the shelf life is 24 months.
Suggestion: Chemical resistance test should be carried out on the printing plate for the first trial.
Safety: Before use, please know in detail that gloves should be worn when using MSDS products and avoid long-term direct contact with skin.
* The purpose of this technical information is to provide information and advice to customers. Successful application depends on various factors beyond our control.
This document can not be used as a basis for legal claims.