Home > Products
PRODUCTS
- Printing chemicals
- Flat offset offset fountain solution
- Newspaper printing moistening solution -- cold fixing
- Commercial rotary printing fountain solution - thermosetting
- Fountain solution auxiliary products
- Water-borne light oil
- Light oil
- Dumb oil
- Special light oil
- Printing powder
- Oily spraying
- Hydrophilic and oily spraying
- Silicone lubricating emulsion
- Thermosetting rotary printing of silicon oil
- Printed chemicals
- Printing plate acid cleaning liquid
- Basic cleaning liquid
- Plate protector
- Baked version of glue
- Developer solution
- Printing cleaner
- Rubber blanket & ink roll cleaner
- Environmental friendly water-based cleaning agent
- Ink roll maintenance
- Others
RA 7000 Positive Plate Developer Plus 30079
-
Appearance: liquid, color: transparent
Odor: No characteristic odor. Solubility: Completely soluble in water.
Boiling Point: 100 Relative Density: 20 1.03
Flash point: No PH value: 9.9
- Application: Positive Plate Developer PLUS It is an alkaline imaging agent designed for rapid imaging of positive plates. In view of the high contrast and material consumption rate,
It is suitable for manual, machine or bath development.
Features: Suitable for manual, immersion and machine development.
The shelf life is 12 months.
Rapid development;
The typical consumption rate is 10 square meters per liter.
Compatible with most positive plates;
Concentrated solution with a ratio of 1:4 is also supplied.
Usage:
Manual: Smear PS 7000 developer solution, and quickly spread it to the whole version, waiting for about 20 seconds, so that the developer can play its role; then remove with rubber brush, and then apply a small amount of positive plate developer to ensure that the layout is clean; finally rinse with clean water.
Immersion development: thoroughly clean the positive and negative sides of the plate; then immerse the plate in the bath containing the solution; the development time in the fresh solution should not exceed 2 minutes, but the time increases with the aging of the bath.
Machine development: Install PS 7000 developer in the automatic processor until the level specified in the supplier's manual. It is used in the range of 18-24 degrees Celsius.
Packing: 5/drum, 4 drums/case
Storage: A cool and dry warehouse will do.
Shelf life: The original package is not open, avoid direct sunlight, shelf life of 24 months.
Suggestion: Clean it with clean water.