Home > Products
PRODUCTS
- Printing chemicals
- Flat offset offset fountain solution
- Newspaper printing moistening solution -- cold fixing
- Commercial rotary printing fountain solution - thermosetting
- Fountain solution auxiliary products
- Water-borne light oil
- Light oil
- Dumb oil
- Special light oil
- Printing powder
- Oily spraying
- Hydrophilic and oily spraying
- Silicone lubricating emulsion
- Thermosetting rotary printing of silicon oil
- Printed chemicals
- Printing plate acid cleaning liquid
- Basic cleaning liquid
- Plate protector
- Baked version of glue
- Developer solution
- Printing cleaner
- Rubber blanket & ink roll cleaner
- Environmental friendly water-based cleaning agent
- Ink roll maintenance
- Others
-
Solid content： 50± 2% Appearance： White waterborne emulsion PH (25 degree C)： Seven viscosity： 40 cP (SP2 @50 RPM) Be careful： Antifreeze Recommended dosage ： 2-6% - ABCSIL 50 also offers:
Improved wetting of applicator rollers, resulting in more uniform distribution of silicone onto the printed web, and reduced 'fly-off of emulsion droplets.
Reduced viscosity, to assist accurate dilution using proportional dosers, and more efficient drainage of containers, to reduce wastage.
A frost-stable concentrate, avoiding the risk of spoilage due to freezing during winter.
APPLICATION:
ABCSIL 50 is dosed to clean water feeding the applicator rollers following the chilling/set stage of printing. Dosage rate will depend upon ink quality, paper type and print speed, but a guide is given in the table above.
Dilutions of ABCSIL 50 should not be stored in the applicator bath for more than 72 hours as impurities returned from the applicator rollers may adversely affect stability.
PACKAGING:
ABCSIL 50 is supplied in 25kg, 200kg and 1000kg containers