Relief Calcium Remover 30056

• 

• Appearance:	:	Liquid
  Color:	:	Yellow
  Odour:	:	No particular odour
  Solubility:	:	Completely soluble in water
  Boiling Point:	:	100 C
  Relative density:	:	1.00 @ 20℃
  Volatility by vol：	:	100
  pH value:	:	1.3
  Flash point:	:	No Flash

• Advantages:
  - Will eliminate all calcium from inking and dampening rollers
  - Economic to use
  - Will help keep rubber rollers in optimum condition
  - Will not affect the rubber rollers, the chemicals will only interact  
    with the calcium 
  - Will help to increase productivity
  - Within 5 minutes the operators can see the calcium being  
    eliminated from the rubber rollers
  - Harmless to operators
  Recommendations for use:
  First clean the inking and dampening rollers with your normal roller 
  wash or MRC88, to remove any ink from the surface of the rubber 
  rollers. Second use a roller paste or our Dynaklean to remove 
  ingrained ink from the inking rollers. Then add a sufficient amount 
  of Relief to the top inking roller,  let Relief work in for about 3-5 
  minutes, add more Relief to keep all rollers moist. After about 3 
  minutes a white foam will start to show, this is the calcium being 
  removed from the rubber rollers.  After 5 minutes add water to the 
  top inking roller, connect the wash-up blade, and you will now 
  observe a thick white sludge being scraped off, by the wash-up 
  blade, this is the calcium which has been removed from the 
  rubber rollers, add more water to the top inking roller, in order to 
  completely wash off the calcium from the surface of the rollers.
  If the calcium problem is serious, repeat the treatment until all 
  calcium has been removed, normally one treatment is sufficient. 
  Relief should be used every time a normal roller maintenance is 
  

  performed,  and probably more often in hard water areas.

  Packaging:   1 liter/1 box / 12 liters