Home > Products
PRODUCTS
- Printing chemicals
- Flat offset offset fountain solution
- Newspaper printing moistening solution -- cold fixing
- Commercial rotary printing fountain solution - thermosetting
- Fountain solution auxiliary products
- Water-borne light oil
- Light oil
- Dumb oil
- Special light oil
- Printing powder
- Oily spraying
- Hydrophilic and oily spraying
- Silicone lubricating emulsion
- Thermosetting rotary printing of silicon oil
- Printed chemicals
- Printing plate acid cleaning liquid
- Basic cleaning liquid
- Plate protector
- Baked version of glue
- Developer solution
- Printing cleaner
- Rubber blanket & ink roll cleaner
- Environmental friendly water-based cleaning agent
- Ink roll maintenance
- Others
-
Appearance: Liquid
Colour: Clear
Odour: No particular odor
Solubility: Completely soluble in water
Boiling Point: 100 C
Relative Density : 1.04 @ 20 C
Volatily by vol. : 90-95
pH concentrate : 11.2
Flash Point (C) : No Flash
- Advantages:
- Easy to use, fast acting
- Thoroughly cleans out water based coating systems and units
- Removes unwanted ink from press frames
- Removes old stains from floors
- Low VOC
Recommendations for use:
To clean coating systems and units: Start with a dilution of 50%
with water, and then try up to 100% dilution with water. Pour into
coating tanks and allow to circulate until coating is dissolved
and the system is clean. Then flush out with water.
To remove ink from press frames: Pour onto a clean shop towel
and wipe in a side-to-side motion to remove ink and other residue.
Or spray directly onto press frame with at spray bottle and then
wipe off with a shop towel.
Packaging: 1 liter/1 box / 12 liters