PRODUCTS
- Printing chemicals
- Flat offset offset fountain solution
- Newspaper printing moistening solution -- cold fixing
- Commercial rotary printing fountain solution - thermosetting
- Fountain solution auxiliary products
- Water-borne light oil
- Light oil
- Dumb oil
- Special light oil
- Printing powder
- Oily spraying
- Hydrophilic and oily spraying
- Silicone lubricating emulsion
- Thermosetting rotary printing of silicon oil
- Printed chemicals
- Printing plate acid cleaning liquid
- Basic cleaning liquid
- Plate protector
- Baked version of glue
- Developer solution
- Printing cleaner
- Rubber blanket & ink roll cleaner
- Environmental friendly water-based cleaning agent
- Ink roll maintenance
- Others
Press Control CTP Fountain Solution 30030
-
Appearance: Liquid
Colour: Deep Purple
Odour: No characteristic odour
Solubility: Completely soluble in water
Boiling Point: 100 C
Relative Density : 1.05 @ 20 C
Volatily by vol. : 90-95
pH concentrate : 3.1
Flash Point (C) : No Flash
Packing size: 5 liters/25 liters/200 liters
Press Control CTP Fountain Solution
Press Control CTP is a one-step alcohol replacement fountain solution designed for all types of presses. The excellent wetting characteristics and special desensitizers in Press Control enable presses to be run at high speeds without any loss of wetting and the subsequent increase in water feeds. Ink feedback and piling are minimized and start-ups are fast and trouble free. Press Control is fully biodegradable and contains added antifoams and corrosion inhibitors.Press Control contains humectants to prevent premature drying of the printing plate during brief shot downs. The fount contains a balanced blend of the appropriate acid/salt combination providinga stable pH in all waters with little or no drift.
Advantages:
- Safe on all plates, for use on conventional, CtP, Violet, and polyester plates
- For use on sheet-fed and webs
- Phosphate free formula for heat-set webs
- Use as a fountain solution and alcohol replacement
- Creates good wetting and viscosity on the plate
- Eliminates the use of IPA
Recommendations for use:
A normal recommended dosage is 2-4% of Press Control per liter
of water. However, the optimum dosage will vary according to the
conditions and may need to be determined by experimentation.
Physical and chemical properties:
Appearance: Liquid
Colour: Deep Purple
Odour: No characteristic odour
Solubility: Completely soluble in water
Boiling Point: 100 C
Relative Density : 1.05 @ 20 C
Volatily by vol. : 90-95
pH concentrate : 3.1
Flash Point (C) : No Flash
Packing size: 5 liters/25 liters/200 liters