Home > Products > Others
- Others
-
Ink Repellent 30057
Appearance:
Thick paste
Colour:
White/Grayish
Odour:
Light Ammonia odour
Solubility:
Not soluble in water
Boiling Point:
100 C
Relative Density：
1.08 @ 20 C
VOC： 61 lbs/gal.
pH concentrate :
Alkaline
Flash Point (C) :
No Flash - Advantages:
- Reduces ink piling on perfecting and impression cylinders
- Reduces ink picking during back up
- Effective longer than silicone or waxes
- Easily applied
- For use on paper cutter beds and joggers, bindery equipment,
and presses
Recommendations for use:
For use on impression cylinders: Using a clean shop towel, apply
an even layer onto a clean, dry impression cylinder (back cylinder).
Allow paste to dry to a haze (app. 5 minutes), dust off with a clean
shop towel. It may be necessary to repeat the process on extremely
dull or pitted cylinders.
For use on cutter beds and joggers: Wipe all dust and build-up
from surface to be treated. Apply an even layer and allow paste
to dry to a haze (app. 5 minutes), dust off with a clean shop towel.
On the initial application once the old oxidation has been removed,
the cutter bed will be slick enough to slide paper over it. Using Ink
Repellent from time-to-time on the cutter beds will protect the
metal from oxidation and keep the bed surface slick.
Packing size: 200 gram tube/24 tubes/box
- Contact person: Li Zhipeng E-Mail: lizhipeng@abcalliedchem.com
Tel: +86 755-33678780 +86 755-33678781
Fax: +86 755-33678761
E-Mail: info@abcalliedchem.com
Website: http://www.abcalliedchem.com
Company address:
A-2（四） Industrial Zone, Shajing Street, Baoan,Shenzhen ,China
www.abcalliedchem.com ALL Rights Reserved