Flexowash 100 is a biodegradable water miscible detergent for

removing water based inks. Consisting of a blend of detergents,

surfactants and solvents, Flexowash 100 will quickly and effectively

remove both wet and dried water based inks from ink fountains,

ink pumping systems, Anilox rollers, photopolymer printing plates

and dies. Flexowash 100 is also recommended for use with both

conventional and Flexo printer-slotters, Flexo bag presses using

water based inks, and as an all round general purpose cleaner.

Advantages:

- Low odor

- Low VOC

- Non-flammable

- Contains no phosphates

- Dilutes with water

Recommendations for use:

May be used in concentrated form, or diluted by water. Pour a

liberal amount onto a shop towel and clean of required parts or

pour directly onto the rollers.

Physical and chemical properties:

Appearance:  Liquid             Colour:  Clear

Odour:  No particular characteristic odor

Solubility:  Soluble in  water

Boiling Point:  101 C              Relative Density : 1.03 @ 20 C

Volatily by vol. : 93.5              pH concentrate : 13

Flash Point (C) : No Flash

Packaging:   1 liter/12 liters/box