Relief Calcium Remover 30056-ABC/ALLIED PRESSROOM PRODUCTS(CHINA) LTD.

Ink roll maintenance

Relief Calcium Remover 30056

Appearance:	:	Liquid
Color:	:	Yellow
Odour:	:	No particular odour
Solubility:	:	Completely soluble in water
Boiling Point:	:	100 C
Relative density:	:	1.00 @ 20℃
Volatility by vol：	:	100
pH value:	:	1.3
Flash point:	:	No Flash

Advantages:
- Will eliminate all calcium from inking and dampening rollers
- Economic to use
- Will help keep rubber rollers in optimum condition
- Will not affect the rubber rollers, the chemicals will only interact
with the calcium
- Will help to increase productivity
- Within 5 minutes the operators can see the calcium being
eliminated from the rubber rollers
- Harmless to operators
Recommendations for use:
First clean the inking and dampening rollers with your normal roller
wash or MRC88, to remove any ink from the surface of the rubber
rollers. Second use a roller paste or our Dynaklean to remove
ingrained ink from the inking rollers. Then add a sufficient amount
of Relief to the top inking roller, let Relief work in for about 3-5
minutes, add more Relief to keep all rollers moist. After about 3
minutes a white foam will start to show, this is the calcium being
removed from the rubber rollers. After 5 minutes add water to the
top inking roller, connect the wash-up blade, and you will now
observe a thick white sludge being scraped off, by the wash-up
blade, this is the calcium which has been removed from the
rubber rollers, add more water to the top inking roller, in order to
completely wash off the calcium from the surface of the rollers.
If the calcium problem is serious, repeat the treatment until all
calcium has been removed, normally one treatment is sufficient.
Relief should be used every time a normal roller maintenance is

performed, and probably more often in hard water areas.

Packaging: 1 liter/1 box / 12 liters